We have been deeply involved in the industry for more than ten years, and have served more than 10W+ customers. WiFi modules, Bluetooth modules, power modules and other products are in more than 80 countries and regions, providing customers with professional and reliable IoT module products.
220V to 15V2A regulated switching power supply module 30M15 ac to dc step-down isolation fast charging source module
Multiple specifications of power module options
MULTIPLE SPECIFICATIONS AVAILABLE
International universal voltage 85-264VAC/120-350VDC 30W power module, built-in EMC circuit, regulated single output
MODEL | POWER | VOLTAGE | ELECTRICITY |
HLK-30M05 | 30W | 5V | 6000mA |
HLK-30M09 | 30W | 9V | 3333mA |
HLK-30M12 | 30W | 12V | 2500mA |
HLK-30M15 | 30W | 15V | 2000mA |
HLK-30M24 | 30W | 24V | 1250mA |
*Same series product size and pin size are the same | |||
*Size 57.5x 33.5X 23.5mm (±8%) |
Global universal input voltage 90~265VAC
Input and output isolation withstand voltage 3000VAC
Low power consumption, environmental protection, no-load loss < 0.1W
High efficiency, high power density
High reliability, long life design, continuous working time> 100,000 hours
Good output short circuit and over current protection and self-recovery
National standard pin, PCB board in-line installation
Potting and sealing with high-quality environmentally friendly waterproof and thermal conductive glue, dustproof, moistureproof, shockproof and flame retardant
Meet UL/CE/EMC and safety testing requirements
Can be used in medical, industrial control, electric power, instrumentation, communication, railway and other fields
Input part
Fuse/fuse: protection circuit when the module is abnormal (recommended: 2A/250Vac slow blow)
Varistor/ Varistor: Protection module during cumulative surge (recommended: 10D561K)
C1/Safety capacitor: filter, safety protection (EMC certification) (recommended: 0.1uF/275Vac)
L1/Common mode inductor: EMI filtering (recommended: inductance 10-15mH, current 1-2A)
*Fuse and varistor are basic protection circuits (required)
*If certification is required, safety capacitors and common mode inductors cannot be omitted
Output section
C2/filter capacitor
Filter, after adding this capacitor, the user can adjust the output ripple.
[Recommended] Aluminum electrolytic capacitors, with a capacitance value of 100-220uF, and withstand voltage derating greater than 75%.
RL/load
load
*Note: If the definition of each pin of the power module is not consistent with the selection manual, the marking on the physical label shall prevail.
Environmental conditions | |
Operating temperature | -25~+60℃ |
storage temperature | -40~+85℃ |
Relative humidity | 5~95%RH |
Cooling method | Natural cooling |
Atmospheric pressure | 80~160Kpa |
Altitude | ≤2000m |
vibration | Vibration coefficient 10~500Hz, 2G10min./1cycle60min.each along X,Y,Z axes Meet the requirements of secondary road transportation |
Input characteristics (normal temperature test) | |
Rated input voltage | 100-240VAC |
Input voltage range | 85-264VAC/70-350VDC |
Maximum input current | ≤0.8A |
Input surge current | ≤50A(typical) |
Input slow start | ≤50mS |
Long-term reliability | MTBF≥100,000 H |
External fuse recommendation | 2A/250V(Slow blow) |
Output characteristics | |
Output load | Load percentage 100%MAX |
Voltage regulation rate | ±0.2 %(Tpy) |
Load Regulation | ±0.5 %(Tpy) |
Output overcurrent protection | 150%-200%(Maximum load) |
Output short circuit protection | Sustainable, self-healing (do not damage the host) |
Ripple & noise | ≤100mVp-p |