We have been deeply involved in the industry for more than ten years, and have served more than 10W+ customers. WiFi modules, Bluetooth modules, power modules and other products are in more than 80 countries and regions, providing customers with professional and reliable IoT module products.
WiFi relay network remote controller SW04
Firmware versionAli Cloud Private Cloud
Phone control
Phone name Cloud Intelligence (Ali Public Version APP) HLK-SW04 (Our APP)
PC control HLK-SW04.exe
LAN control
Tmall Elf Only control 1 way
switch status
Timing function
Jog function
Flip function
Name of each switch Only modify the name of the entire device Each way can be modified
Name of each switch
Note: contact parameters 250VAC/10A, 30VDC/10A
Alibaba Cloud Edition
Indicator light description
Indicator effectState description
Periodic fast flashing 2 times
Distribution network mode
Configure the network and bind the device to the module through the APP
Continuous and slow flashing (on for 1 second, off for 1 second)The module is trying to connect to a WiFi hotspot
Continuous flashThe module normally tries to connect to the cloud service
Always onBlock is connected to the cloud service
button
Button nameFunction description
RST Short press, controller hardware reset
ES0/DefaultLong press for 6-10 seconds
clear the network configuration information and reconfigure the network
Private Cloud Edition
Indicator light description
Indicator light descriptionState description
Long on and short off (on for 3s and off for 100ms) Invalid module key
Always onModule is in AP mode
Cycle fast flashing on 100ms off 100msConnecting to the network (STA mode)
Long off, short on, off for 3s, on for 100msConnected to the network (STA mode)
button
Button nameFunction description
RST Short press, controller hardware reset
ES0/DefaultLong press for 6-10 seconds
clear the network configuration information and reconfigure the network
SW1-4Short press to flip relay status
*The state where the contact is open in the static state is called normally open, and the state where the contact is closed in the static state is called normally closed.
Controller and light (AC equipment) connection diagram
Controller and electromagnetic lock (DC device) connection diagram
You need to download the Alibaba public version of the APP-Cloud Smart APP, which is different from the Alibaba Smart APP in terms of service platform.
There are two ways to enter the distribution network interface, one is to scan the QR code of the device distribution network in the add device interface, and the other is to directly search for "Hilink Relay SW04" in the add device interface, and click to enter directly after searching. Distribution network interface
1. Enter the device model to enter the distribution network interface:
2. Scan the QR code of the equipment distribution network to enter the distribution network interface:
When the controller is used as an STA to control via a local area network or remotely, it needs to connect the controller to an AP (router) through a network configuration. The network configuration method has one-key configuration and AP network configuration.
After the network is successfully configured, you need to search and discover the device through the LAN, first return to the main interface, and then click the following operation to discover the device, and enter the control interface.
AP network configuration-Confirm that the controller is in AP mode through the indicator light, and then open the mobile APP to perform the following operations:
Electrical parameters | |
Input power | 5-24V |
Input Current | 1A |
Relay input voltage | 250VAC/30VDC(MAX) |
Relay input current | 10A(MAX) |
input Output | 4 channels each output separately |
other | |
size | 66.3*69*18mm |
weight | 64.6g |
Networking method | Connect to superior router/WiFi hotspot |
Network distance | Recommended 30-80 meters (high-power high-gain antenna available) |
a fixed way | Fixing holes*4 |
Precautions | Do not operate with electricity during installation |